Particle Technology Ltd. Hall 8 / D1
Exhibitor Profile
As one of the UK's leading and most respected test houses, Particle Technology operates at the forefront of product reliability, supplying and supporting customers all over the world.
Particle Technology is proud to offer UKAS accredited testing in the following areas:
Air Filter Testing:
EN 779:2012
ISO 16890:2016
Particle Technology is the first test lab in the UK to have gained UKAS accreditation for the new standard, ISO 16890, and acts independently to any manufacturer or distributor, this means that our results can be relied on and trusted.
Sand & Dust Testing:
MIL-STD-810G
RTCA/DO-160G Section 12 Sand & Dust
DEF STAN 00-35
BS EN 60529:1992 A2:2013 (IP3,4,5 &6X) & (IPX4,5,6,7 & 8)
ISO 20653:2013 (IP3X, IP4X, IP5KX & IP6KX) & (IPX4, IPX5, IPX6, IPX6K, IPX7 & IPX8)
Particle Technology houses two of the largest sand and dust testing facilities in Europe. The requirements of all the major specifications for dust penetration and erosion by sand can be met for both 'swirling' and 'driving' conditions.
CLEANLINESS TESTING
ISO 16232:2007 (Part 2,3,4,6,7,10)
Standard Test Dust:
The production of Test Dusts is one of Particle Technology's critical operations. Our test dusts are used worldwide for the testing and certification of a wide range of equipment.
We look forward to welcoming you to our stand D1.
Products / Markets
Product Index
- Benzinfilterprüfung
- Filtergehäuse
- Filtermedienprüfung
- Filtertesteinrichtungen
- HEPA & ULPA Filterprüfung
- Laserbeugung
- Luftfiltermedien
- Luftfilterprüfung
- Partikelanalysemethoden
- Partikelgrößenanalyse
- Partikelgrößenverteilungsanalyse
- Prüfdienstleistungen
- Test Stäube
- Testeinrichtung
- Vorfilter
- Öl- und Benzinfilterprüfung
- Ölfilterprüfung
Market Scope
- Automobilindustrie
- Filtrations- und Separationsindustrie
- Luft- und Raumfahrtindustrie
- Umweltschutz
Product Index
- Air Filter Media
- Air Filter Testing
- Filter Housings
- Filter Media Testing
- Filter Test Rigs (Gas/Air)
- Fuel Filter Testing
- HEPA & ULPA Filter Testing
- Laser Diffraction
- Oil Filter Testing
- Oil- & Fuel Filter Testing
- Particle Measuring Methods
- Particle Size Analysis
- Particle Size Distribution Analysis
- Pre-Cleaning Filters
- Test Dust
- Test Rigs
- Testing Services
Market Scope
- Aerospace Industry
- Automotive Industry
- Environmental Protection
- Filtration and Separation Industry
Product Index
- Test Dust
- 实验台
- 无菌无尘空气过滤器测试
- 油过滤测试
- 测试服务
- 滤壳
- 激光衍射
- 燃油滤清器测试
- 石油和燃油过滤器
- 空气过滤器介质
- 空气过滤测试
- 过滤器试验设备（气体/空气）
- 过滤媒介测试
- 预先清洁式过滤器
- 颗粒大小分布分析
- 颗粒大小分析
- 颗粒测量方法
Market Scope
- 汽车工业
- 环境保护
- 航空航天业
- 过滤与分离工业
Product Index
- HEPA ULPA اختبار
- Oil Fuel أجهزة إختبار الفلاتر
- Test Dust
- أجهزة إختبار
- أجهزة إختبار الفلاتر (غاز/هواء)
- إنحرافات ليزيرية
- اختبار تصفية وسائل الاعلام
- اختبار مصفاة النفط
- الوقود اختبار التصفية
- تحليل الجسيمات الصفائحية
- تصفية العلب
- تصفية الهواء اختبار
- خدمات الاختبار
- طرق قياس الجسيمات
- فلاتر التنظيف الأولي / المسبق
- مواد فلاتر الهواء
- موزع أحجام الجسيماتالتحاليل
Market Scope
- صناعات الفلترة وفصل المواد
- صناعة الألبان
- صناعة السيارات
- صناعة الفضاء
Product Index
- Analyse de distribution de tailles de particules
- Analyse de tailles de particules
- Diffraction laser
- Equipements d’essai
- Equipements d’essais de filtres (gaz/air)
- Filtres de prénettoyage
- Filtres à huile et à carburant test
- Fluides pour filtres à air
- Les boîtiers de filtre
- Méthodes de mesures de particules
- Services de contrôle
- Test Dust
- Test de filtre à air
- Test de filtre à carburant
- Test de filtre à huile
- Test de médias filtrants
- Test des filtres HEPA et ULPA
Market Scope
- Industrie automobile
- Industrie aérospatiale
- Industrie de filtration et de séparation
- Industrie laitière
Product Index
- Alloggiamenti filtro
- Analisi dimensione particelle
- Analisi distribuzione dimensione particelle
- Banchi di prova
- Diffrazione laser
- Dispositivi test filtro (gas/aria)
- Metodi di misurazione particelle
- Mezzi filtranti aria
- Prefiltri
- Servizi di verifica
- Test Dust
- Test del filtro del combustibile
- Test di filtraggio HEPA&ULPA
- Verifica filtro aria
- Verifica filtro olio
- Verifica mezzi filtranti
- Verifica olio & filtro carburante
Market Scope
- Protezione ambientale
- Settore aerospaziale
- Settore automobilistico
- Settore filtrazione e separazione
Product Index
- Analiza rozkładu wielkości cząsteczek
- Analiza rozmiaru cząsteczek
- Dyfrakcja laserowa
- Filtry wstępne
- Media filtrów powietrza
- Metody pomiaru cząsteczek
- Obudowy filtrów
- Stanowiska do testowania
- Stanowiska do testowania filtrów (gazu/ powietrza)
- Test Dust
- Test filtra paliwa
- Testowanie filtrów HEPA & ULPA
- Testowanie filtrów oleju
- Testowanie filtrów oleju i paliwa
- Testowanie filtrów powietrza
- Testowanie mediów filtrów
- Usługi testowania
Market Scope
- Filtrowanie i separacja
- Ochrona środowiska
- Przemysł lotniczy
- Przemysł samochodowy
Product Index
- Análise da dimensão das partículas
- Análise da distribuição da dimensão das partículas
- Banco de ensaios
- Banco de ensaios para filtros (gases/ar)
- Carcaças de Filtro
- Difracção laser
- Filtragem de óleo
- Meios de filtro do ar
- Métodos de medição de partículas
- Pré-filtros
- Serviços de teste
- Test Dust
- Teste de Filtro de ar
- Teste de filtro HEPA e ULPA
- Teste do filtro de combustível
- Teste do filtro de óleo
- Testes de meios filtrantes
Market Scope
- Indústria aeroespacial
- Indústria automóvel
- Indústria de filtragem e separação
- Indústria leiteira
Product Index
- HEPA и ULPA фильтр тестирования
- Test Dust
- Анализ размеров частиц
- Воздушный фильтр Тестирование
- Испытательная аппаратура
- Корпуса фильтров
- Лазерная дифракция
- Нефть и проверка топливных фильтров
- Обслуживание Тестирования
- Размер частиц Анализ
- Способы измерения частиц
- Тест Топливный фильтр
- Тестирование Фильтрующие материалы
- Тестирование масляный фильтр
- Установки для испытания фильтров (газ / воздух)
- Фильтрующий материал
- Фильтры предварительной очистки
Market Scope
- Авиакосмическая промышленность
- Автомобильная промышленность
- Молочная промышленность
- Отрасль фильтрации и сепарирования
Product Index
- Análisis de distribución de formas de partículas
- Análisis de formas de particulas.
- Difracción láser
- Dispositivos para pruebas
- Dispositivos para pruebas de filtros (gas/aire)
- Filtro de Viviendas
- Filtros de aceite e da combustible test
- Filtros de limpieza previa
- HEPA y ULPA pruebas de filtros
- Medios de filtros de aire
- Métodos de medición de partículas
- Prueba de filtro de combustible
- Prueba del filtro de aceite
- Prueba del filtro de aire
- Pruebas de medios filtrantes
- Servicios de Pruebas
- Test Dust
Market Scope
- Industria aeroespacial
- Industria de la automoción
- Industria de la filtración y la separación
- Industria de los productos lácteos
Product Index
- Filtre Gövdeleri
- Filtre Test Ekipmanları (Gaz/Hava)
- Filtre ortamı test
- Filtresi Ortamı & Yakıt Filtreleri Test
- HEPA ve ULPA filtre testi
- Hava Filtresi Ortamı
- Hava Filtresi Test
- Lazer Difraksiyon
- Partikül Boyut Dağılımı Analizi
- Partikül Boyutu Analizi
- Partikül Ölçüm Yöntemleri
- Test Donanımları
- Test Dust
- Yakıt filtresi testi
- Yağ filtresi testi
- test Hizmetleri
- Ön Temizleme Filtresi
Market Scope
- Filtrasyon ve Ayırma Endüstrisi
- Havacılık Endüstrisi
- Otomotiv Endüstrisi
- Çevre Koruma
Product Index
- HEPA & ULPA 필터 테스트
- 공기 여과재
- 공기 필터 테스트
- 레이저 회절
- 시험 장치
- 시험용 분진
- 여과재 테스트
- 연료 필터 테스트
- 오일 및 연료 필터 테스트
- 오일 필터 테스트
- 입자 측정 방법
- 입자 크기 분석
- 입자 크기 분포 분석
- 전처리 필터
- 테스트 서비스
- 필터 테스트 장치(가스/공기)
- 필터 하우징
Market Scope
- 여과 및 분리 산업
- 자동차 산업
- 항공우주 산업
- 환경 보호
Product Index
- HEPAおよびULPAフィルターテスト
- エアフィルターメディア
- エアフィルター試験
- オイルおよび燃料フィルター試験
- オイルフィルター試験
- テスト装置
- フィルターテストリグ（ガス・空気）
- フィルターハウジング
- レーザー回折
- 洗浄前フィルター
- 濾過材試験
- 燃料フィルター試験
- 粒子径分析
- 粒子測定方法
- 粒度分布分析
- 試験サービス
- 試験塵
Market Scope
- 濾過および分離技術工業
- 環境保護
- 自動車産業
- 航空宇宙産業
What's new
UKAS Accreditation Verified in first Audit for Air Filter Testing Operation
Particle Technology Ltd first achieved UKAS accreditation in 2007 with the environmental dust and sand testing facility, this was followed by Ingress Protection (IP) testing. Pressure rinse and gravimetric cleanliness testing followed, and, most recently air filter testing.
UKAS accredited specifications tests now include:
- MIL-STD-810G (w/CHANGE 1) Method 510.6 Procedure I & II
- RTCA/DO-160G Section 12 Sand and Dust
- DEF STAN 00-35, pt. 3, issue 5, Test CL25
- STANAG 4370 AECTP 300 Ed 3 Method 313
- EN 2591-308:1998
- BS EN 60529:1992 A2:2013 (IP3X, IP4X, IP5X and IP6X)
- BS EN 60529:1992 A2:2013 (IPX4, IPX5, IPX6, IPX7 & IPX8)
- ISO 20653:2013 (IP3X, IP4X, IP5KX and IP6KX)
- ISO 20653:2013 (IPX4, IPX5, IPX6, IPX6K, IPX7 and IPX8)
- ISO 16232:2007 (Part 2,3,4,6,7,10)
- EN 779:2012
- ISO 16890
- Air Filter Testing
In November 2018, UKAS visited to conduct their annual survey, this was the first recertification for the newly accredited air filter test facility, which took place in 2017 for EN779:2012 and then later in 2018 for ISO 16890:2016. The annual verification visit took place over 2 days, UKAS representatives observed and ensured that test processes, data, equipment calibration and quality systems were in line with the requirements of ISO 17025. They were satisfied that we are able to demonstrate consistent results and approved us for retention of our accreditation for a further 12 months.
Greg Spicer MD, paid tribute to his air filter test team; headed by Dr Mike Stillwell, who have worked diligently to install and maintain the equipment through numerous tests that have been performed for filter manufacturers, filter media manufacturers, end users or distributors of air filter products.
The introduction of ISO 16890 for measuring the efficiency of air filters that clean the air we breathe has resulted in a greater ability to correlate filter performance to the quality of that air.
The fact that the efficiency rating now directly relates to PM (particulate matter) sizes means it is easier to compare filter efficiency of one to another. This has driven the need for manufacturers and distributors of these products to present this information in a common format that is more easily recognised when looked at against International Air Quality measures. Particle Technology is the first test lab in the UK to have gained UKAS accreditation and acts independently to any manufacturer or distributor, this means that our results can be relied on and trusted with certainty.
This gives Particle Technology an edge over other UK test facilities, but also means that UK based filter manufacturers and distributors no longer need to look to Europe, or wider afield for their test requirements. Whether it be certified testing for ISO 16890, ISO 5011 (automotive air filter testing), EN779:2012 (industrial air filter testing that is still being used in some sectors for process air filtration) or a bespoke air filter test, Particle Technology can support and give customers confidence in the results.