BOKELA GmbH

Booth
Hall 8 · A45
Country
Germany
Website
bokela.com

Company profile

Automatically translated with DeepL.

BOKELA 是一家业绩优异的中型企业,是全球领先的工艺过滤用现代化过滤设备供应商之一。BOKELA 创新且高性能的过滤技术为化工、石化、制药、食品及原材料行业的客户提供经济且可持续的解决方案:

• 旋转式真空过滤器 | BoVac 碟式、BoVac 滚筒式和 BoVac 盘式过滤器

• 连续压力和蒸汽压力过滤 | BoHiBar 碟式和滚筒式过滤器

• 动态错流过滤 | BoCross Dynamic 和 BoCross MicroScreen 过滤器

• 过滤设备改造 | 过滤装置的现代化改造与升级

• 便携式实验室设备 | BoFilTest 和 BoCrossTest。

BOKELA 是 TSUKISHIMA HOLDINGS Co., Ltd. 的成员公司。

在工艺过滤领域,BOKELA 是面向化工、制药、食品行业以及矿石和矿物加工领域的全球领先过滤设备供应商之一:

• 真空旋转过滤器 | BoVac Disc、BoVac Drum 和 BoVac Pan 过滤器

• 连续压力和蒸汽压力过滤 | BoHiBar Disc 和 BoHiBar Drum 过滤器

• 动态错流过滤 | BoCross Dynamic 和 BoCross MicroScreen 过滤器

• 过滤设备改造 | 过滤设备的现代化改造与性能提升

• 便携式实验室测试设备 | BoFilTest 和 BoCrossTest。

BOKELA 是 TSUKISHIMA HOLDINGS Co., Ltd. 的成员公司。

Product areas 17

Industries

What's new 2

BoVac Disc XL352 – The world's largest vacuum disc filter

The BoVac Disc XL352 is the world's largest vacuum disc filter. With a filtration area of 352 m², it boasts an impressive capacity for filtering up to 1,000 tons of tailings per hour, while maintaining particularly low residual moisture levels. It only requires around 10% more floor space than our previous largest model, meaning that throughput can be doubled with just one replacement and only minor adjustments to the building and transition to the conveyor belt. The unique BoVac Disc XL352 sets new standards in tailings filtration.

Due to the typical BOKELA design BoVac Disc filters have outstanding hydraulic properties. Pressure losses are minimal and the pressure difference, which is effective on the filter cloth, is up to 100% higher than with conventional disc filters. All components such as filter segments, shaft, filtrate pipes, control head, drive unit and filter trough have been systematically developed. The results are extremely high specific throughputs, intensive cake dewatering, high operational reliability as well as low maintenance and low operating costs. The fully automatic operation and large performance reserves allow a particularly good adaptation to process variations and specific process conditions.

HiBar Drum Filters – The answer to new filtration challenges in battery, minerals and rare earth processing

The world is moving into a new era where machinery drives do no longer run with combustion motors, but more and more with electrical motors – getting the power preferably from a green grid.

The metals and minerals required for electric motors are mainly copper for the winding, aluminium for the casing and iron-cobalt-nickel, neodym-iron-bor or samarium-cobalt for the permanent magnets. The metals required for the batteries are mainly lithium, nickel, manganese, cobalt (NMC with high energy density) or lithium, iron, phosphate (LFP with lower energy density).

Especially elements like lithium, cobalt, neodym, samarium or other elements of the rare earth fraction appear in very low concentration in minerals and require an intense hydro metallurgical processing.

This processing requires several steps of solids liquid separation steps with challenges such as extreme pH-values (<2 or >12), temperatures > 100 °C, intense wash of solids, low moisture, continuous operation, etc. Especially intense wash of solids quite often ends up in two or three steps of filtration with intermediate solids reslurry. However, this pushes CAPEX for filtration equipment to the high end and puts the realization of projects at risk.

Modern pressure drum filters such as the BOKELA BoHiBar Drum XL 18 or XL 26 are able to perform a three-stage counter current cake wash with a slurry that is fed to the filter with a temperature of up to 200 °C and solids with a d50 of down to almost 1 micron.

The design of the filter with:

- A high number of individual filter segments
- A quick drainage of the liquid into the piping system to the control head
- A sharp separation of the wash liquids in the control head
- An operation with back pressure on the filtrate separators

...result in reaching the target figures with only one filter unit while other filter types like plate and frame filter presses require two filters with intermediate reslurry. Or the material of construction does not allow for temperatures in the range of 100-200 °C. Furthermore, this filter can be equipped with a steam hood to reduce the moisture to a minimum.

Images 3