atech innovations gmbh

Booth
Hall 8 · C48
Country
Germany

Company profile

Automatically translated with DeepL.

Membranes céramiques pour la microfiltration et l'ultrafiltration

La société atech innovations gmbh, basée à Gladbeck, est active depuis 1989 dans la distribution et, depuis 1992, également dans le développement et la production de membranes céramiques de haute qualité destinées à une grande variété d’applications industrielles dans les secteurs de la chimie, de la biotechnologie, de l’agroalimentaire ainsi que dans le traitement et le recyclage des eaux usées.

La gamme de produits d’Atech comprend des membranes de différentes géométries et diamètres de canaux, ainsi que les cuves sous pression associées, fabriquées à partir de divers aciers inoxydables et plastiques. Les conceptions sont conformes aux normes internationales et tiennent également compte des exigences en matière d’hygiène, telles que la norme sanitaire américaine 3-A (conception 45-03). De plus, le personnel qualifié et les installations techniques d’Atech sont à disposition pour des prestations telles que des essais de filtration ou des tests sur une installation pilote.

En fonction des exigences de chaque application particulière, atech propose une large gamme de géométries de membranes différentes : des membranes monocanal et multicanaux avec divers diamètres de canaux, adaptées à l’ultrafiltration (à partir de 1 kD) et à la microfiltration (jusqu’à 1,2 µm).

Grâce à sa gamme de produits très étendue, atech est en mesure de fournir des membranes de remplacement pour de nombreux modèles disponibles sur le marché.

Points forts

• Une technologie membranaire de pointe à un prix raisonnable

• Des membranes céramiques depuis 1989

• Des milliers d’installations à travers le monde

• Un partenaire fiable pour l’industrie de la construction d’installations industrielles

Product areas 10

Industries

What's new 2

atech Ceramics in Polypropylene (PP) housings

Since end of 2021 the major producer of polypropylene membranes has stopped his manufacturing for tubular PP membranes.

As a consequence of this termination, PP modules like “Microdyn® tubular modules” or “T-cut-PP” are no longer available, thus membrane system operators are facing a problem if it comes to membrane replacement.

atech innovations gmbh has developed a housing made of polypropylene with exactly the same dimension as the a.m. PP modules but equipped with their unique ceramic membranes in 1,5 µm length (the photo shows a module with 3 m length, for total of 14 membranes).

Just by adapting the individual connections (feed/retentate/permeate), the atech PP modules fit into the PP- membrane system without further modification.
The atech PP-housing does not have any metal parts (fully PP design) so it can be used for corrosive applications as well.

Key features of atech PP module with ceramic membranes:

• pore sizes available from 1,2 µm to 1 kD (including 0,2 µm)
• narrow pore size distribution
• channel diameter 4 mm (5,5 in preparation)
• filter surface (up to 18m²), can be adapted
• similar feed flow rates as PP membranes (no pump modification necessary)
• membranes can be exchanged separately without change of housing
• can be used for corrosive liquids (no metal parts in contact with liquid)
• high chemical resistance
• extremely high water permeability

New membrane geometry complements the atech product portfolio

Among other things, atech innovations gmbh introduces a new membrane geometry to complement the portfolio. This 61/4 geometry is characterized in particular by its very high packing density, which leads to very competitive prices.

atech innovations gmbh, based in Gladbeck, has been active since 1989 in the distribution and, since 1992, also in the development and production of high-quality ceramic membranes for a wide variety of industrial applications in the chemical, biotechnological, food and beverages industries and in the waste water treatment/ recycling industry.

atech’s range of products includes membranes in various geometries and channel diameters as well as pressure vessels used to arrange the membranes in modules. In addition, the qualified staff and the technical facilities of atech are available for services such as filtering tests or tests on a pilot installation.

Depending on the requirements of each particular application, atech offers a wide range of different membrane geometries: single-channel and multi-channel membranes with various channel diameters suitable for ultrafiltration (starting at 1 kD) and microfiltration (up to 1.2 μm). For applications with abrasive liquids, atech has developed Duratech®Plus ceramic membrane, which, thanks to a special thermal treatment process, has an even higher abrasion resistance than the standard membrane, which is also very resistant.

Videos 2

Images 3