Company profile
Automatically translated with DeepL.
微濾過および限外濾過用セラミック膜
グラートベックに拠点を置くatech innovations gmbhは、1989年より高品質なセラミック膜の販売を手掛けており、1992年からは、化学、バイオテクノロジー、食品・飲料業界、および廃水処理・リサイクル業界における幅広い産業用途向けのセラミック膜の開発・製造にも取り組んでいます。
Atechの製品ラインナップには、さまざまな形状やチャネル径の膜に加え、各種ステンレス鋼やプラスチック製の関連圧力容器が含まれています。 これらの設計は国際規格に準拠しているほか、米国3-Aサニタリー規格(設計45-03)などの衛生要件も考慮されています。さらに、Atechの有資格スタッフと技術設備を活用し、ろ過試験やパイロットプラントでの試験などのサービスも提供しています。
個々の用途の要件に応じて、aTechは幅広い種類の膜形状を提供しています。超濾過(1 kDから)および微濾過(最大1.2 µm)に適した、さまざまなチャネル径を持つ単一チャネルおよび多チャネル膜です。
幅広い製品ラインナップにより、atechは市場に出回っている多くの膜の代替品を供給することが可能です。
主要な特長
• リーズナブルな価格で提供される最高水準の膜技術
• 1989年からのセラミック膜の製造実績
• 世界中で数千件に及ぶ導入実績
• プラントエンジニアリング業界における信頼できるパートナー
Product areas 10
Industries
What's new 2
atech Ceramics in Polypropylene (PP) housings
Since end of 2021 the major producer of polypropylene membranes has stopped his manufacturing for tubular PP membranes.
As a consequence of this termination, PP modules like “Microdyn® tubular modules” or “T-cut-PP” are no longer available, thus membrane system operators are facing a problem if it comes to membrane replacement.
atech innovations gmbh has developed a housing made of polypropylene with exactly the same dimension as the a.m. PP modules but equipped with their unique ceramic membranes in 1,5 µm length (the photo shows a module with 3 m length, for total of 14 membranes).
Just by adapting the individual connections (feed/retentate/permeate), the atech PP modules fit into the PP- membrane system without further modification.
The atech PP-housing does not have any metal parts (fully PP design) so it can be used for corrosive applications as well.
Key features of atech PP module with ceramic membranes:
• pore sizes available from 1,2 µm to 1 kD (including 0,2 µm)
• narrow pore size distribution
• channel diameter 4 mm (5,5 in preparation)
• filter surface (up to 18m²), can be adapted
• similar feed flow rates as PP membranes (no pump modification necessary)
• membranes can be exchanged separately without change of housing
• can be used for corrosive liquids (no metal parts in contact with liquid)
• high chemical resistance
• extremely high water permeability
New membrane geometry complements the atech product portfolio
Among other things, atech innovations gmbh introduces a new membrane geometry to complement the portfolio. This 61/4 geometry is characterized in particular by its very high packing density, which leads to very competitive prices.
atech innovations gmbh, based in Gladbeck, has been active since 1989 in the distribution and, since 1992, also in the development and production of high-quality ceramic membranes for a wide variety of industrial applications in the chemical, biotechnological, food and beverages industries and in the waste water treatment/ recycling industry.
atech’s range of products includes membranes in various geometries and channel diameters as well as pressure vessels used to arrange the membranes in modules. In addition, the qualified staff and the technical facilities of atech are available for services such as filtering tests or tests on a pilot installation.
Depending on the requirements of each particular application, atech offers a wide range of different membrane geometries: single-channel and multi-channel membranes with various channel diameters suitable for ultrafiltration (starting at 1 kD) and microfiltration (up to 1.2 μm). For applications with abrasive liquids, atech has developed Duratech®Plus ceramic membrane, which, thanks to a special thermal treatment process, has an even higher abrasion resistance than the standard membrane, which is also very resistant.
