atech innovations gmbh

Booth
Hall 8 · C48
Country
Germany

Company profile

Automatically translated with DeepL.

미세여과 및 한외여과용 세라믹 막

글라드베크에 본사를 둔 atech innovations gmbh는 1989년부터 화학, 생명공학, 식음료 산업 및 폐수 처리/재활용 산업 등 다양한 산업 분야에 사용되는 고품질 세라믹 멤브레인의 유통에 주력해 왔으며, 1992년부터는 개발 및 생산 분야로도 사업을 확장해 왔습니다.

아테크(Atech)의 제품 라인업에는 다양한 형상과 채널 직경을 가진 막은 물론, 다양한 스테인리스강 및 플라스틱으로 제작된 관련 압력 용기도 포함되어 있습니다. 이 설계는 국제 표준을 준수할 뿐만 아니라 미국 3-A 위생 표준(설계 45-03)과 같은 위생 요구 사항도 반영하고 있습니다. 또한, 아테크의 자격을 갖춘 직원과 기술 시설을 통해 여과 시험이나 파일럿 설비 시험과 같은 서비스를 제공합니다.

각 특정 용도의 요구 사항에 따라, atech는 초여과(1 kD부터) 및 미세여과(최대 1.2 µm)에 적합한 다양한 채널 직경을 가진 단일 채널 및 다중 채널 막 등 광범위한 막 형상을 제공합니다.

광범위한 제품 라인업을 바탕으로, atech는 시중에 나와 있는 수많은 멤브레인의 대체품을 공급할 수 있습니다.

핵심 구성 요소

• 합리적인 가격의 최고급 막 기술

• 1989년부터 이어온 세라믹 막 제조

• 전 세계 수천 건의 설치 실적

• 플랜트 엔지니어링 산업의 신뢰할 수 있는 파트너

Product areas 10

Industries

What's new 2

atech Ceramics in Polypropylene (PP) housings

Since end of 2021 the major producer of polypropylene membranes has stopped his manufacturing for tubular PP membranes.

As a consequence of this termination, PP modules like “Microdyn® tubular modules” or “T-cut-PP” are no longer available, thus membrane system operators are facing a problem if it comes to membrane replacement.

atech innovations gmbh has developed a housing made of polypropylene with exactly the same dimension as the a.m. PP modules but equipped with their unique ceramic membranes in 1,5 µm length (the photo shows a module with 3 m length, for total of 14 membranes).

Just by adapting the individual connections (feed/retentate/permeate), the atech PP modules fit into the PP- membrane system without further modification.
The atech PP-housing does not have any metal parts (fully PP design) so it can be used for corrosive applications as well.

Key features of atech PP module with ceramic membranes:

• pore sizes available from 1,2 µm to 1 kD (including 0,2 µm)
• narrow pore size distribution
• channel diameter 4 mm (5,5 in preparation)
• filter surface (up to 18m²), can be adapted
• similar feed flow rates as PP membranes (no pump modification necessary)
• membranes can be exchanged separately without change of housing
• can be used for corrosive liquids (no metal parts in contact with liquid)
• high chemical resistance
• extremely high water permeability

New membrane geometry complements the atech product portfolio

Among other things, atech innovations gmbh introduces a new membrane geometry to complement the portfolio. This 61/4 geometry is characterized in particular by its very high packing density, which leads to very competitive prices.

atech innovations gmbh, based in Gladbeck, has been active since 1989 in the distribution and, since 1992, also in the development and production of high-quality ceramic membranes for a wide variety of industrial applications in the chemical, biotechnological, food and beverages industries and in the waste water treatment/ recycling industry.

atech’s range of products includes membranes in various geometries and channel diameters as well as pressure vessels used to arrange the membranes in modules. In addition, the qualified staff and the technical facilities of atech are available for services such as filtering tests or tests on a pilot installation.

Depending on the requirements of each particular application, atech offers a wide range of different membrane geometries: single-channel and multi-channel membranes with various channel diameters suitable for ultrafiltration (starting at 1 kD) and microfiltration (up to 1.2 μm). For applications with abrasive liquids, atech has developed Duratech®Plus ceramic membrane, which, thanks to a special thermal treatment process, has an even higher abrasion resistance than the standard membrane, which is also very resistant.

Videos 2

Images 3