Fraunhofer Institute for Ceramic Technologies and Systems IKTS

Booth
Hall 8 · B40
Country
Germany

Company profile

Automatically translated with DeepL.

弗劳恩霍夫陶瓷技术与系统研究所(IKTS)致力于高性能陶瓷的应用研究。该研究所位于德国德累斯顿和赫尔姆斯多夫(图林根州)的三个分部,共同构成了欧洲最大的专注于陶瓷研究的研发机构。 依托全面的材料专业知识,该研究所的研发工作覆盖整个价值创造链,直至原型生产。弗劳恩霍夫IKTS形成了材料、技术和系统三大专业领域的有机结合,并辅以最高水平的全面材料诊断技术。

弗劳恩霍夫IKTS积极贡献其在膜技术方面的专业知识,例如在二氧化碳分离、水处理、分散式制氧以及制氢与利用等领域。主要应用领域包括液体过滤、膜接触器、渗透蒸发与蒸汽渗透以及气体分离。

为此,弗劳恩霍夫IKTS研究所开发了种类繁多的膜材料和催化剂,例如用于节能型高温气体分离工艺的材料。所开发的陶瓷、金属及复合材料(金属陶瓷)组件易于集成到中试装置中,并针对高填料密度和高气体流量进行了优化。 另一个重点研究领域是用于热气除尘和颗粒过滤的开孔蜂窝状陶瓷体及膜,以及用于废气净化的陶瓷催化剂载体和催化剂。

Product areas 18

Industries

What's new 3

Hot Gas Filtration Solutions

The purification of particle-polluted exhaust gases at high temperatures (between 250 and 1000 °C) covers a wide range of applications. Major areas of application are the purification of waste gases from the glass and cement industries, from waste incineration plants and biomass gasification, as well as dust removal from gas, steam and combined cycle power plants. Other important applications are in the recovery of valuable materials from catalysts, fumed silica and metal powders. Due to the special filtration conditions and the special requirements on the properties and resistance of the materials, it represents a separate area of filtration.

Ceramic hot gas filter elements are used primarily when conventional or synthetic fabric filters reach their performance limits in cleaning particle-polluted exhaust gases. At temperatures above 800 °C and under very corrosive conditions, hot gas filters made from silicon carbide (SiC) are particularly suitable due to their thermal and chemical resistance. Other materials frequently used are aluminum oxide and cordierite. Good thermal conductivities or low co-efficients of thermal expansion form the basis for good thermal shock resistance of many ceramics, which makes these materials ideal for use under cyclic stresses. SiC hot gas filters are often able to offer cost-effective alternatives to expensive special alloys for filtering exhaust gases up to 1000 °C.

POXOS® - Lowest operating costs and CO2 emissions for local oxygen production

POXOS® generators produce pure oxygen (O2) on site. The patented membrane separation process requires significantly less electricity than pressure swing adsorption. With a high annual utilization rate, the operating costs are significantly lower than for oxygen supply by delivery. Besides, CO2 emissions from oxygen supply can be lowered by more than 50 percent.

Particularly high savings are achieved in wastewater treatment with ozone. The delivery, storage and evaporation of LOx (Liquid Oxygen - cryogenic liquid oxygen) to feed the ozone generators is no longer necessary. The oxygen rich off-gas leaving the wastewater is fed back to the POXOS® generator. The generated oxygen is fully utilized while a closed cycle of process is achieved. In addition, the usually required residual ozone eliminator is unnecessary. If the POXOS® - generator is operated with sewage gas, a CO2-neutral production of the oxygen is possible.

POXOS® generators are designed to be recycled at the end of their service life. The ceramic membrane material contained is fully recycled into the manufacturing process of new membranes to minimize the consumption of resources.

Solutions for water and gas purification

Fraunhofer IKTS has many years of experience in identifying and solving environmental technology issues in industry. Based on detailed process analyses, the advantages of high-performance ceramic materials are harnessed for the development of functional components in separation and reaction technology. The scientists then translate these components into economical system solutions, primarily for industrial water management, the manufacturing industry, mining, and agriculture. The materials and process engineering disciplines at Fraunhofer IKTS are closely interlinked in order to meet all relevant technological, legal, and economic requirements.

Successful approaches aim to combine ceramic membranes for micro-, ultra- and nanofiltration with electrochemical, sonochemical and photocatalytic processes (advanced oxidation processes, AOP). In many cases, specific sensor technology and classic aerobic and anaerobic treatment methods are also incorporated. The institute develops highly integrated components that combine processes such as filtration and adsorption or sono-electrochemical oxidation. The necessary sensor technology is developed and integrated according to requirements. Ceramic elements are the key to continuously expanding the performance of such highly integrated compact systems and the operating conditions (high temperatures, aggressive media). The new process combinations significantly reduce the energy consumption of water treatment. This increases process efficiency and environmental benefits while reducing process costs.

Videos 1

Images 3