Use the Select-Fields below to filter the programme.
The programme list countries and regions.
Plenary
Lunch
K01 - Keynote Lecture 01
G01 - Face Masks
G02 - Dust Separation
L01 - Centrifugal Separation
Coffee Break
K02 - Keynote Lecture 02
F01 - Sustainable Filter Elements and Media
G03 - Air Purification
G04 - Filter Test Systems
K03 - Keynote Lecture 03
F02 - Advanced Materials for Filters and Establishment of Test Facilities
L02 - Digital Simulation Techniques for Filtration Processes
L03 - Sieving - Magnetic Separation - Aeration
G05 - Industrial Applications
G06 - Indoor Air Cleaners
L04 - Continuous Vacuum Cake Filtration
L05 - Filtration and Adsorption I
K04 - Keynote Lecture 04
F03 - Bio-based Polymers Versus Fossil Based Polymers
G07 - Industrial Gas Cleaning
G08 - Ambient Air Applications
K05 - Keynote Lecture 05
F04 - Enhancement of Filter Media Performance I
L06 - Press Filters I
L07 - Filtration and Adsorption II
F05 - Poster Session
G09 - Poster Session
G10 - Poster Session
L08 - Poster Session
M01 - Poster Session
F06 - Enhancement of Filter Media Performance II
G11 - Adsorption
L09 - Press Filters II
M02 - Water Treatment
F07 - PFAS-Free Filter Media and PFAS Separation
G12 - Pleated Filter
L10 - Depth Filtration I
M03 - Biotechnical Applications
F08 - Filter Media Characterization
G13 - Mist and Droplets
L11 - Depth Filtration II
M04 - Membrane Characterization
F09 - Surface Functionalization of Filter Media I
G14 - Modelling and Simulation I
L12 - Filtration Fundamentals and Lab Scale Tests
M05 - Ultrafiltration
F10 - Surface Functionalization of Filter Media II
G15 - Modelling and Simulation II
L13 - Surry Pretreatment - Thickening - Flocculation
Day: 30 June 2026 Time: 10:45 - 12:00 h add to selection
Cake-Forming Filtration of Suspensions – Challenges and Solutions
Prof. Dr.-Ing. Habil. Ioannis Nicolaou
12:00 hh - Lunch
Day: 30 June 2026 Time: 13:00 - 14:15 h Room 1 add to selection
Carbon Negative Biochar Filter: Market Development for ESG and Climate Solutions
Prof. Dr. Yong Sik Ok
Day: 30 June 2026 Time: 13:00 - 14:15 h Room 3 Session Chair: Prof. Jennifer Niessner add to selection
Next generation FFP2: Simulation-based optimization of processes and media for filtering face pieces
R. Kirsch*, C. Mercier, W. Arne, S. Antonov, Fraunhofer Institute for Industrial Mathematics (ITWM); E. Dahrmann, IMSTec GmbH; T. Kara, Reifenhäuser Reicofil, Germany
Limited gas protection in filtering facepiece respirators containing activated carbon
D. Tobjörk*, M. Sundqvist, FOI, Swedish Defence Research Agency, Sweden
Design and development of 3D structured personalised nose mask for better protection of human respiratory health from air pollutants in asthma patients
M. Basak*, S. Bakshi, S. Mukherjee, National Institute of Fashion Technology (NIFT); A. Mitra, Visva Bharati University; A. Mukhopadhyay, Dr. B.R. Ambedkar National Institute of Technology Jalandhar, India
Day: 30 June 2026 Time: 13:00 - 14:15 h Room 4 Session Chair: Prof. Achim Dittler add to selection
Flow field improvement for the optimization of the performances of a pulse-jet baghouse
A. Ginestet*, D. Pugnet, M. Robitu, CETIAT - Centre Technique des Industries Aérauliques et Thermiques, France
Operations For The Bag Filter System: PROJET MEGA®
M. Garg*, Intensiv-Filter Himenviro Gmbh, Germany
Enhancing hot gas filter performance in earthquake-prone regions and other extreme environments
A. Baker*, ALKEGEN, USA
Day: 30 June 2026 Time: 13:00 - 14:15 h Room 2 add to selection
Recent developments in process modeling for solid-liquid separation in solid bowl centrifuges
M. Gleiß*, Karlsruhe Institute of Technology (KIT), Germany
Experimental study on the separation efficiency and pressure drop of selected industrial hycrocyclone geometries with 2-inch inlet dimension
T. Condrut*, T. Senfter, C. Mayerl, M. Berger, T. Kofler, E. Leusmann, M. Pillei, MCI - The Entrepreneurial School, Austria
Numerical investigation of the filling process in discontinuous filter centrifuges as a basis for improved process design
L. Künkler*, Karlsruhe Institute of Technology (KIT), Germany
14:15 hh - Coffee Break
Day: 30 June 2026 Time: 14:45 - 16:00 h Room 1 add to selection
Insights into shear-enhanced dynamic filtration : Advancements and applications in solid–liquid separation
Prof. Su-En Wu, Chung Yuan Christian University, Taiwan
Day: 30 June 2026 Time: 14:45 - 16:00 h Room 2 add to selection
Green competitiveness in action: How filtration and separation technologies are powering the sustainable economy
J. Verde*, Global Authority on Economic Resilience and Sustainable Development, Puerto Rico
From circular filtration materials to audit‑proof sustainability data: Physical–digital traceability enabled by SMX and validated with CETI
P. Wijns*, CleverSustainability, Germany; M. Marival, M. Vulliet, CETI - Centre Européen des Textiles Innovants, France
Sustainability-by-design in filtration: Pilot testing and fundamental research for sustainable filtration innovations
P. Wijns*, CleverSustainability, Germany; M. Marival, M. Vulliet, CETI – Centre Européen des Textiles Innovants, France
Day: 30 June 2026 Time: 14:45 - 16:00 h Room 3 Session Chair: Prof. Gerhard Kasper add to selection
Miniature electrostatic precipitator
H. Salmela*, I. Kulmala, A. Säämänen, VTT Technical Research Centre of Finland, Finland
Aeromobil: Testing and mathematical modelling of bioaerosol decontamination and evaluation of infection risk in indoor spaces
C. Hartl*, V. Sharp, C. Kirchnawy, G. Ettenberger, OFI - Austrian Research Institute for Chemistry and Technology; R. Zweiler, M. Goritschnig, K. Paar, K. Plank, GET - Güssing Energy Technologies GmbH, T. Neuhuber, B. Glinsner, ZSI - Centre for Social Innovation Ltd., Austria
Thermo-mechanical causes of microfiber release and fiber micro-damage in tumble drying: Filtratıon and emission control
M. Atila Özer*, M. Emin Çoban, H. Koc, Senol Çavuşoğlu, Beko; U. Kıvanç Şahin, Istanbul Technical University, Turkey
Day: 30 June 2026 Time: 14:45 - 16:00 h Room 4 Session Chair: Prof. Achim Dittler add to selection
Integrated HEPA/ULPA filter qualification: Linking ISO 29463 laboratory testing with ISO 14644 3 in situ cleanroom verification
S. Schütz*, K. Oelschlägel, S. Grosse, Topas GmbH, Germany, K. Alderson, Topas Inc., USA
Filter testing according to ISO 29461 – Air intake filter systems for rotary machinery
C. Kappelt*, M. Neukirch, J. Landgraf, R. Adam, J. Müller, Topas GmbH, Germany
Testing of human pathogenic microorganisms & allergens with a newly developed BSL 2 safety work bench compatible compact filter test rig
C. Hartl*, V. Sharp, C. Kirchnawy, G. Ettenberger, OFI - Austrian Research Institute for Chemistry and Technology; R. Zweiler, M. Goritschnig, K. Paar, K. Plank, GET - Güssing Energy Technologies GmbH; T. Neuhuber, B. Glinsner, ZSI - Centre for Social Innovation Ltd., Austria
16:00 hh - Coffee Break
Day: 30 June 2026 Time: 16:45 - 18:00 h Room 1 Session Chair: Prof. Gerhard Kasper add to selection
How can we bridge the gap between indoor air quality and energy efficiency?
Prof. Dr. Jennifer Niessner
Day: 30 June 2026 Time: 16:45 - 18:00 h Room 2 add to selection
Polyurethane applications in filtration and regulation (EU) 2020/1149: Requirements, implications and recommendations for action. Challenge or opportunity?
F. Steegmanns*, Stockmeier Urethanes GmbH, Germany
Ensuring safety and performance in drinking water filtration through advanced resin formulations
L. Schifano, F. Bertani*, F. Campanini, ELANTAS Europe, Italy
Establishment of an advanced separation and filtration technology centre: Laboratory-based innovation, performance validation, and industrial application
M. Rasooly*, M. Saadatpour*, F. Khalili*, Isfahan Science and Technology Town, Iran
Day: 30 June 2026 Time: 16:45 - 18:00 h Room 3 add to selection
From theory to practice: Leveraging scientific methods in industrial applications
T. Dobler*, BOKELA GmbH, Germany
The potential of data-driven modelling in filtration processes
M. Fuhrmann*, H. Nirschl, M. Gleiß, Karlsruhe Institute of Technology (KIT), Germany
Towards 3D CFD-DEM simulation of solid-liquid multi-pass filter testing
K. Schmidt*, IT for Engineering (it4e) GmbH; G. M. Burhan, BinNova Microfiltration GmbH, Germany
Day: 30 June 2026 Time: 16:45 - 18:00 h Room 4 Session Chair: Dr. Harald Anlauf add to selection
Introduction of an innovative separation plant consisting of a sieve and magnetic filter for the reduction of radioactive waste
A. Heneka*, M.J. Chaudhry, S. Gentes, C.-O. Krauß, Karlsruhe Institute of Technology, Germany
Monitoring the conventional biological aerobic process performance in a climate-changing environment using multilayer perceptron artificial neural network algorithm
M. Muloiwa*, C. Zvinowanda, Tshwane University of Technology, South Africa
Impact of climate temperature changes and excessive airflow rates on volumetric mass transfer coefficient in the activated sludge process: Sustainable development goal 13 – climate action.
M. Muloiwa*, Tshwane University of Technology; C. Zvinowanda, University of Johannisburg, South Africa
Day: 01 July 2026 Time: 09:00 - 10:15 h Room 3 add to selection
Nanofiber based filtration media for ultra clean and stable semiconductor manufacturing processes
S. Van Landuyt*, M. Wahib, NV Bekaert, Belgium
An integrated filtration management framework for natural gas value chain: From upstream production to distribution networks
M. Rasooly*, M. Saadatpour, F. Khalili, E. M. Homagerani, Isfahan Science and Technology Town, Iran
Sustainable antibacterial electrospun nanofiber media for high-performance air filtration applications
M. M. Shirmohammadi*, Termeh Mask Co.; Z. Shafiei, F. Golbabei, V. Shahbazian, S. Kalantary, M. R. Pourmand, E. Masoorian, K. Azam, Tehran University of Medical Sciences, Iran
Day: 01 July 2026 Time: 09:00 - 10:15 h Room 4 Session Chair: Dr. Ralf Kirsch add to selection
New standardized test methods for air cleaners – Influence of measurement instrumentation and test aerosol
S. Schumacher*, C. Asbach, N. Rudnik, A. Säämänen, Institute of Environment & Energy, Technology & Analytics e.V. (IUTA), Germany; I. Ehder-Gahm, H. Salmela, VTT Technical Research Centre of Finland, Finland
Controlled evaluation of performance degradation in stand-alone air cleaners under progressive particle loading
R. Rezaei*, Agentis Air LLC, USA
Optimal filter thickness for indoor air purifiers
C. Lin, Massachusetts Institute of Technology; M. Lin, Johns Hopkins University; J. Lin, University of California; USA; Y.-M. Kuo, Chung Hwa University of Medical Technology, P-Y. Tsai, C.-W. Lin, S.-H. Huang, C.-C. Chen*, National Taiwan University, Taiwan
Day: 01 July 2026 Time: 09:00 - 10:15 h Room 1 add to selection
Separation of fine non-ferrous metal sulfide precipitates by vacuum filtration
S. Jayasekara*, T. Kinnarinen, S. Virolainen, LUT School of Engineering Sciences, Finland
From idea to production – New XL352 high-performance disc filter – The biggest in tailings
J. Hahn*, BOKELA GmbH, Germany
Development of an autonomous vacuum belt filter for the adaptive filtration of mining waste
P. Hartmann*, M. Gleiß, Karlsruhe Institute of Technology (KIT), Germany
Day: 01 July 2026 Time: 09:00 - 10:15 h Room 2 add to selection
Sustainable surface engineering of coconut shell based activated carbon using green hydrophobic modifiers for enhanced pesticide sequestration
M. Shroff Rama*, I. Ramakrishnan, Filtrex Technologies, India
Advancing FDM and SLS 3D-printed scaffolds for enhanced ammonium capture from water
N. Dehbashi Nia*, T. Kim, Bokseong Kim, Y. Park, Y. Hwang, Seoul National University of Science and Technology, Korea; E. Repo, A. Hurskainen, LUT Lappeenranta University of Technology, Finland
Technical fiber of chemically transformed Polyacrylonitrile as a performant adsorbent of toxic industrial and pharmaceutical pollutants
M. Tahiri*, M. Saadouni, Hassan II University; O. Cherkaoui, A. Nadi, ESITH - REMTEX, Morocco
10:15 hh - Coffee Break
Day: 01 July 2026 Time: 10:45 - 12:00 h Room 1 Session Chair: Prof. Anthony Stickland add to selection
The dirty side of filtration – Possibilities, limits, and new developments in filter cake washing
Prof. Dr.-Ing. Bernhard Hoffner – Technical University of Applied Science Mannheim – Germany Prof. Dr. Urs Peuker – TU Bergakademie Freiberg – Germany
Day: 01 July 2026 Time: 10:45 - 12:00 h Room 2 add to selection
Biobased polymers for meltblown nonwovens
T. Hiller*, S. Ringger, L. Bonten, M. Azimian, German Institutes for Textil- and Fiber Research (DITF), Germany
Antimicrobial biobased meltblown filter materials functionalized with inorganic nanoparticles
G. Masionė*, M. Tichonovas, D. Čiužas, E. Krugly, D. Martuzevičius, Kaunas University of Technology, Lithuania
Reimagining filtration: Biopolymer-based woven and nonwoven media for a circular future
A. Mukherjee*, National Institute of Fashion Technology, India
Day: 01 July 2026 Time: 10:45 - 12:00 h Room 3 add to selection
How high efficiency fabric filtration enables stable amine based carbon capture: insights from awg wuppertal
B. Karlsson*, Ahlstrom Sweden AB, Sweden; M. Koller, ANDRITZ AG, Austria
Industrial-scale field demonstration of integrated pm and nox removal using pleated SCR pellet catalyst filter bags in a wood waste incineration boiler
Y.-O. Park*, D.-K. Shin, K.-D. Kim, Deahan PNC Co., Ltd; S.-D. Kim, KIER - Korea Institute of Energy Research, South Korea
Purenat, the new biomimetic media that reinvents photocatalysis
N. Kinadjian Caplat*, C. Teixeira, Purenat, France
Day: 01 July 2026 Time: 10:45 - 12:00 h Room 4 Session Chair: Prof. Jennifer Niessner add to selection
Results of the aerosolfd project on how air purifiers can improve air quality at metro stations
M. Lehmann*, S. Kunze, K. Kedwell‑Simmering, MANN+HUMMEL GmbH; C. Asbach, Institute of Environment & Energy, Technology & Analytics e.V. (IUTA), Germany; T. Canas, Metropolitano de Lisboa; Portugal; S. Agathokleous, T. Moreno, CSIC-IDAEA; C. Casado, Fundacion CARTIF, Spain; K. Alstrup-Jensen, The National Research Centre for the Working Environment, Denmark
Filtration performance of moss
S. Holfeld*; R. Heidenreich, M. Lauer, Institute of Air Handling and Refrigeration (ILK), Germany
Molecular filtration media, tailored to better air quality and new market needs
C. Prost*, S. Pigeot-Rémy, Ahlstrom Specialties SAS, France; L. Cerra, Ahlstrom Italia SpA, Italy
Day: 01 July 2026 Time: 13:00 - 14:15 h Room 1 Session Chair: Prof. Wilhelm Höflinger add to selection
PM removal from combustion fumes – How to tackle regulation, energy efficiency and decarbonation
Prof. Dr. Laurence Le Coq, IMT Atlantique Nantes, France
Day: 01 July 2026 Time: 13:00 - 14:15 h Room 2 add to selection
Mission zero disruptive & sustainable water filtration media
T. Gerdes*, F. Edelmeier, F. Meyer, Haver & Boecker, Germany
AGXX – Clean and long-lasting filter performance through effective microbial prevention
O. Asmus*, M. Danz, T. Schwob, Heraeus Precious Metals, Germany
Sintered nonwovens: Using the advantages of hydro- entangled nonwovens and converting them into metal or ceramic sintered filter media
T. Thiem*, Norafin Industries GmbH , Germany
Day: 01 July 2026 Time: 13:00 - 14:15 h Room 3 Session Chair: Prof. Gernot Krammer add to selection
A machine vision-based solution for cloth inspection and anomaly detection in filter presses
F. Dalmonte*, D. Collini, Diemme Filtration Srl, Italy
Modeling non-uniformities in plate-and-frame filter press operations
L. Dipilato*, G. Krammer, Graz University of Technology; J. Tausendschön, Research Center Pharmaceutical Engineering (RCPE), Austria
Advances in membrane filter plates for enhanced filter press efficiency
B. Fischer*, K. Podratzky, G. Börste, Lenser Filtration GmbH, Germany
Day: 01 July 2026 Time: 13:00 - 14:15 h Room 4 add to selection
Bamboo based activated carbon - New products and applications development
M. Shen*, Huaqing Activated Carbon; H. Mingyu, Ningbo Tianyi Activated Carbon Co. Ltd., China
Enhancing commercial active carbon filters with locally sourced high-performance biomaterials
V. Rissanen*, A. Aguilar-Sánchez, K. Salminen, T. Tammelin, VTT Technical Research Centre of Finland; O. Manninen, J. Aalto, AQVA Finland, Finland; K.-Y. Lee, Imperial College London, UK
PAC-assisted precoat filtration for removal of micropollutants in sewage and industrial wastewater
T. Buchwald*, A. Klinkert, Hoffmann Maschinen- und Apparatebau GmbH, Germany
Day: 01 July 2026 Time: 14:45 - 16:00 h Room 1 Session Chair: Prof. Ioannis Nicolaou add to selection
Development of electrospun recycled polystyrene nanofibrous media supported by 3d-printed structures for efficient air filtration
F. A. Lima*, D. S. Correa, Nanotechnology National Laboratory for Agriculture (LNNA); M.L. Aguiar, V.G. Guerra, Federal University of São Carlos, Brazil
The operating pressure on stability of polypropylene hollow fiber verified by porometers
K.-S. Liao*, L.-W. Ku, Poretech Instrument Inc.; K.-Y. Lin, S.-E. Wu, Chung Yuan Christian University, Taiwan
Water interactions in nano- to macroscopic scale – Beyond state-of-the-art analytical tools for filter and membrane research
T. Virkkala*, A. Aguilar-Sanchez, V. Rissanen, T. Tammelin, VTT Technical Research Centre of Finland, Finland
Development of air filter media produced by solution blow spinning using polylactic acid (pla)/lignin for nanoparticle removal
F. A. Lima*, G. M. J. Cabrini, L. A. C. Gonzaga, D. S. Correa, Embrapa Instrumentation; M. L. Aguiar, V. G. Guerra, Federal University of São Carlos, Brazil
Tailored filtration media for reliable and efficient industrial liquid purification
J. Krauß*, MANN+HUMMEL GmbH, Germany
Enhanced removal of per- and polyfluoroalkyl substances (PFAS) using activated carbon modified with surfactant containing cationic groups
M. Shroff Rama*, I. Ramakrishnan, Filtrex Technologies Pvt Ltd, India
Composite-cloths as filter media: Combining smallest pores sizes and mechanical robustness in one filter medium
M. Müller*, SPÖRL KG, Germany
Production of cellulose acetate nanofibers derived from sugarcane bagasse for application in air filtration membranes
L. A. Pimentel*, P. A. M. Chagas, G. da Mata Cardoso, M. L. Aguiar, Federal University of São Carlos, Brazil
Simulation-driven design and optimization of woven mesh regenerators for high-temperature heat pumps
J. Warnecke*, H. Schlebusch, C. Boltersdorf, GKD - Gebr. Kufferath AG, Germany
Day: 01 July 2026 Time: 14:45 - 16:00 h Room 3 add to selection
Wetting behavior of different liquids on electret filters and on the base material of the filters
D. Stoll*, S. Antonyuk, University of Kaiserslautern-Landau (RPTU); S. Schumacher, B. Kroll, C. Asbach, Institute of Environment & Energy, Technology & Analytics e.V. (IUTA), Germany
Ageing of fine fiber polypropylene meltblown in dynamic conditions
C. Desquilles*, Alkegen, France
The next generation of nanofiber-based air filtration: Nanofiber media vs. glass fiber
V. Demirel*, HIFYBER, Turkey
Optimizing the use of room air purifiers in combination with HVAC filters for IAQ and energy efficiency for PM2.5 and ultrafine particle removal
L. Rothenberg*, Agentis Air LLC, USA
Mathematical strategies for designing energy-efficient and sustainable air filtration systems: a review
M.S. Giri Nandagopal*, Excelair Filters, United Arab Emirates
Adhesion force measurements between particles under variation of relative humidity
F. Belter*, E. Schmidt, University of Wuppertal; V. Brandt, H. Kruggel-Emden, Technische Universität Berlin, Germany
Fiber entanglement effects on filtration efficiency and aging of filter media for particulate control in the steel industry
A. C. Coelho Vieira*, L. A. F. Sartori, F. A. Lima, M. L. Aguiar, Federal University of São Carlos; R. Sartim, Federal University of Espírito Santo, Brazil
Enhancement of a multi-layer construction model for describing dust separation throughout the entire filtration process by con-sideration of the interactions of the filtering elements
J. Ciesielski*, Q. Zhang, University of Wuppertal, Germany
A model-based study on the targeted preloading of depth filters for customized filter solutions for dust separation
Q. Zhang*, University of Wuppertal, Germany
Experimental evaluation of convergent–divergent geometries applied to natural gas treatment in the oil industry
M.L. Aguiar*, K. R. B. Melo, L. L. X. Augusto, G. C. Lopes, V. G. Guerra, Federal University of São Carlos, Brazil
Day: 01 July 2026 Time: 14:45 - 16:00 h Room 4 Session Chair: Prof. Gerd Mauschitz add to selection
Testing of welding fume separators to ensure compliance with occupational exposure limits
D. Kochale*; R. Heidenreich, S. Herrmann, Institute of Air Handling and Refrigeration (ILK), Germany
Evaluation of conventional models for predicting performance of oil mist filters with full scale tests
E. Matteusson*, Karlstad University, Sweden
Determination of separation efficiency for a spray mist system for dust suppression in tunnel construction
T. Senfter*, D. Hackl, C. Mayerl, M. Berger, T. Kofler, E. Leusmann, M. Pillei, MCI - The Entrepreneurial School; T. Hochsteiner, R. Galler, Montanuniversität Leoben, M. Halwachs, PORR Bau GmbH, Austria; R. Antretter, G. Neumann, BeMo Tunnelling GmbH; J. Kegenhoff, Korfmann Lufttechnik GmbH, Germany; M. Schöll, Brenner Basistunnel BBT SE, Italy
Scaling up the separation of fine dust from diffuse sources using electrically charged water spray mist
M. Weidemann*, M. Kaul, E. Schmidt, University of Wuppertal, Germany
Investigation of structural changes of particle agglomerates within the channels of a wall-flow filter under the influence of condensed water
M. Engelhardt*, E. Schmidt, University of Wuppertal, Germany
Experimental study on NO₂-assisted regeneration in a gas cleaning model filter channel
O. Desens*, F.P. Hagen, J. Meyer, A. Dittler, Karlsruhe Institute of Technology, Germany
Microstructural analysis of multicomponent hetero-agglomerates formed in a turbulent pipe flow
J. Witte*, E. Schmidt, University of Wuppertal; V. Kolck, H. Kruggel-Emden, Technische Universität Berlin, Germany
Combined filtration of contaminants in lithium-ion battery manufacturing
D. Keßlau*; R. Heidenreich, D. Kochale, Institute of Air Handling and Refrigeration (ILK), Germany
Nanofiber-microporous activated carbon lamination: A structurally stable dual-phase filtration architecture
F. Tezcan*, HIFYBER, Turkey
Day: 01 July 2026 Time: 14:45 - 16:00 h Room 2 Session Chair: Dr. Marco Gleiss add to selection
PFAS removal from the fuel cell exhaust stream using ion exchange resins
S. Leininger*, MANN+HUMMEL GmbH, Germany
Tailoring ZIF-8 surface chemistry via amine modification for efficient p-Cresol adsorption
M. Iftikhar*, University Technology Malysia (UTM), Malaysia
Experimental and numerical investigation of surface-induced coalescence in liquid-liquid phase separators
S. Temiz*, R. Jesse, Franken Filtertechnik KG, Germany
Development of a high-precision filtration and classification system using cross-flow filtration and centrifugal field
H. Satone*, K. Iimura, S. Taguchi, T. Yamamoto, University of Hyogo, Japan
Day: 01 July 2026 Time: 14:45 - 16:00 h Room 5 add to selection
Towards an effective model for counter-current flow in hollow fiber modules
L. Resyli*, R. Kirsch, S. Osterroth, Fraunhofer Institute for Industrial Mathematics (ITWM); A. Klar, University of Kaiserslautern-Landau (RPTU), Germany
A revolutionary approach for maximising process water reuse and resource recovery through a smart, circular and integrated solution
Alexey Khakalo*, VTT Technical Research Centre of Finland Ltd, Finland
Critical raw material recovery with tailor-made nanofiltration membranes
M. Abel*, B. Bräsel, A. Limper, I. Rose, naion.tech, Germany
Preparation of bimetallic organic frameworks based on Fe-Ni imobilized in carbon fibers: Filtration of emerging contaminants from water
P. Prediger*, L. d. J. Chulluncuy Julcarima, N. Gabriele Camparotto, T. de Figueiredo Neves, State University of Campinas, Brazil
Membrane applications in agrochemical manufacturing
D. Clarke*, M. Chippendale, S. Genoud, Syngenta, UK
Application of artificial Intelligence for energy consumption optimization in a seawater desalination plant
F. Z. Benali*, H. Bachir Bouiadjra, H. Bouabdesselam, National Polytechnic School of Oran, Algeria
Pressure-based fouling index for evaluating membrane fouling in constant-rate filtration
Q. Zhang*, N. Katagiri, Meijo University, Japan
Overcoming membrane fouling in water purification: A comprehensive approach
Y. Ezaier*, A. Hader, Hassan II University, Morocco
Mechanistic insights into pretreatment-induced water quality changes and swro membrane fouling
D. Jang*, N. Kim, E. Lee, Hanbat National University, South Korea
Biocide-free nanocellulose antifouling coatings: A scalable and renewable solution for water filtration
A. Aguilar-Sánchez*, T. Tammelin-Peltonen, V. Rissanen, VTT Technical Research Centre of Finland, Finland; B. Jalvo, Kemikalieinspektionen; J. Li, A. Mathew, Edouard Pesquet, Stockholm University, Sweden
Day: 01 July 2026 Time: 16:45 - 18:00 h Room 1 add to selection
Enhancing mechanical filtration performance of thermobonded media through fiber-level design
M. Ahmed*, Beaulieu Fibres International, Belgium
3D–textile based filters for biotechnological wastewater remediation, exhaust air purifitation, and for microplastic filtration
J. Sarsour*, B. Ewert, T. Stegmaier, N. Krasteva, German Institutes of Textile and Fiber Research (DITF), Germany
Simulation of the filter performance of wire meshes for the filtration of polymer melts
C. Mercier*, R. Kirsch, S. Osterroth, D. Niedziela, D. Neusius, Fraunhofer Institute for Industrial Mathematics (ITWM), Germany
Day: 01 July 2026 Time: 16:45 - 18:00 h Room 2 Session Chair: Prof. Sergiy Antonyuk add to selection
Validated simulation of toluene sorption in 3D activated carbon for cabin air filtration
A. Stiefelmaier, P. Eichheimer, M. Luczak*, T. Sterbak, A. Wiegmann, Math2Market GmbH; F. Keller, MANN+HUMMEL GmbH, Germany
Effects of koh activation on CO2 adsorption in bamboo biochar
J. Heo*, D. Park, Korea Railroad Research Institute - KRRI, South Korea
Selective noble gas separation using a metal-organic framework filter system
M. Yoon*, Kyungpook National University, South Korea
Day: 01 July 2026 Time: 16:45 - 18:00 h Room 3 add to selection
Study of best condition on the filterability of thermally treated (HTC) bio-sludge from a tannery, through a filter press
D. Collini*, D. Pirini, B-PLAS Sbrl; S. Gilioli, Deltacque Srl, Italy
Combining constant pressure and declining rate filtration to model high pressure dewatering rolls
A. D. Stickland*, N. I. K. Ekanayake, S. Hassan, University of Melbourne; D. R. Lester, RMIT University, Australia
Shear-assisted high-solids filtration of red mud using high pressure dewatering rolls
S. Hassan*, R. Cavalida, A. D. Stickland, The University of Melbourne, Australia
Day: 01 July 2026 Time: 16:45 - 18:00 h Room 4 add to selection
Coupling microfiltration with micropollutant degradation and adsorption through reactive membrane surface engineering
A. Schulze*, K. Fischer, Z. Niavarani, M. Schmidt, D. Breite; Leibniz Institute of Surface Engineering (IOM), Germany
Modular treatment solutions for the elimination of short- and ultra-short-chain pfas from industrial wastewater and groundwater
F. Mushtaq, E. Morlas*, Oxyle AG, Switzerland
Cornerstone: Integrated technologies and digital solutions for circular water, energy, and solute recovery from industrial wastewater
C. A. Quist-Jensen*, I. Bousrih, H. F. Sulaiman, S. Díaz-Quezada, A. Ali, Aalborg University
Day: 02 July 2026 Time: 09:00 - 10:15 h Room 1 Session Chair: Prof. Wilhelm Höflinger add to selection
Will ePTFE membrane be able to withstand PFAS and remain leading air/liquid filtration material for the next 30 years
K.-J. Choi*, Clean & Science Co., USA
No-PFAS-added filtration media developed by Alkegen
Advanced filtration systems with micro-adsorbents for micropollutant and pfas removal: Pile cloth media filtration and ceramic membrane filtration
T. Fundneider*, R. Schäfer, A. Hernández, Mecana AG, Switzerland; T. Reid, Aqua Aerobic Systems, Inc., USA
Day: 02 July 2026 Time: 09:00 - 10:15 h Room 2 Session Chair: Dr. Matthias Waldenmaier add to selection
Operating behavior of pleated filter medium geometries in a standardized test-rig with pulse-jet-cleaning
J. P. Knisley*, J. Meyer, A. Dittler, Karlsruhe Institute of Technology (KIT), Germany
Prediction of SO2 breakthrough curves of pleated filters in ansys fluent
A. Widmann*, K. H. Lepper, Hengst SE, Germany
An engineering-based approach for the optimization of pleat number in dust collection filters
O. Osmanagaoglu*, Tempo Filtre, Turkey
Day: 02 July 2026 Time: 09:00 - 10:15 h Room 3 Session Chair: Dr. Lars Spelter add to selection
Nanofiber for fuel and oil filtration
J. Gao*, NFT Purification Technology Inc., USA
Static vs. cyclic flow testing of hydraulic filter cartridges: A filter media manufacturer’s perspective / comparative performance analysis
R. Bharadwaj*, ALKEGEN, USA
New liquid filter test methods at disposal for the fluid process industry
N. Petillon*, IFTS Institut de la Filtration et des Techniques Séparatives, France
Day: 02 July 2026 Time: 09:00 - 10:15 h Room 4 add to selection
Integrated continuous downstream processing for enzyme separation using aqueous two-phase flotation (atpf) and ultrafiltration
K. C. Lohfink*, H. Nirschl, Karlsruhe Institute of Technology (KIT), Germany
Impact of microalgae-derived organic matter on membrane fouling and fouled-membrane characteristics
Q. Zhang, N. Katagiri*, Meijo University, Japan
PES nanofibers for cost-effective, high efficiency prefiltration in bioprocessing
K. Higginson*, J. Laastad, F. Rezaei, B. Swortzel, Hollingsworth & Vose, USA
Day: 02 July 2026 Time: 10:45 - 12:00 h Room 1 add to selection
Estimation of separation size of nonwoven metallic filter media based on probability model
S. Ishikawa*, Y. Yoshida, Kansai Wire Netting Co., Ltd., Japan
Water permeability measurements of porous filter media with poroluxTM revo porometer
M. Ängeslevä*, W. Motyka, D. Dutczak, A. Sobolewska, I. Struzynska-Piron, E. Pattyn, Aptco Technologies GmbH, Germany
From µCT to digital twin: AI-based characterization of nonwoven filtration media
C. Kühnle*, A. Grießer, R. Westerteiger, E. Glatt, M. Luczak, T. Sterbak, A. Wiegmann, Math2Market GmbH, Germany
Day: 02 July 2026 Time: 10:45 - 12:00 h Room 2 add to selection
Multi-scale experimental approach for investigating the fundamental mechanisms of oil mist filtration under realistic operating conditions
B. Jaumann*, J. Meyer, A. Dittler, Karlsruhe Institute of Technology, Germany
Influence of filtration velocity and drainage material pore size on the spatio-temporal drainage behaviour of oil in oil mist coalescence filters
R. Mandic*, J. Meyer, A. Dittler, Karlsruhe Institute of Technology, Germany
Modeling of filtration process in complex filter structures using a physics-informed neural network coupled with smoothed particle hydrodynamic
A. Zargaran, F. Hartwig, U. Janoske*, University of Wuppertal, Germany
Day: 02 July 2026 Time: 10:45 - 12:00 h Room 3 add to selection
Clay-based filtration for multi-pollutant stormwater treatment: Time-resolved removal of suspended solids, nutrients, and metals
N. Bolourieh*, LUT School of Engineering Sciences, Finland
Filter media design for mitigation of gel shearing defects in optical polymer film processing
S. Vandendijk*, S. Van Landuyt, J. Ye, NV Bekaert, Belgium
Filtration pressure behavior during constant-rate filtration using string-wound cartridge filter media
S. Oguri*, K. Watanabe, M. Iwata, and H. Yagishita, Sanshin Mfg. Co., Ltd., Japan
Day: 02 July 2026 Time: 10:45 - 12:00 h Room 4 Session Chair: Prof. Pierre-Yves Pontalier add to selection
State of the art on methods for analyzing pores and the filtration efficiency of microfiltration membranes
New standards available to qualify ultra and nano filtration membranes
Tracking microplastic transport in hollow fiber membranes by fluorescence and pore network modeling
R.I. Peinador*, IFTS - Institute of Filtration & Techniques of Separation, France
Day: 02 July 2026 Time: 13:00 - 14:15 h Room 1 Session Chair: Dr. Lars Spelter add to selection
Functionalised PU foam as a platform for transforming waste to fuel
S. Chavan*, P. Mayall, The Vita Group ; M. Lathbury, D. Carlotta-Jones, Wastewater Fuels, UK
Dry impregnation solutions for MOFs
L. Monin*, S. Bouzouita, Fibroline S.A., France
Reducing total polar materials in frying oil using a functionalized filter pad
R. Rock*, Ahlstrom Filtration, USA; C. Läck, Ahlstrom Sweden AB, Sweden; S. Pigeot-Rémy, Ahlstrom Specialties, France
Day: 02 July 2026 Time: 13:00 - 14:15 h Room 2 add to selection
Mathematical modelling of an ionizer-assisted filter system
A. Vora*, T. van der Zwaag, A. Bankodad, S. Haep, Institute of Environment & Energy, Technology & Analytics e.V. (IUTA), Germany
Numerical investigation on the influence of fiber bundles on the flow resistance and filtration efficiency of nonwovens
A. Charvet*, N. Bardin-Monnier, D. Thomas, Lorraine University; S. Bourrous, Autorité de Sûreté Nucléaire et de Radioprotection, France; R. Kirsch, Fraunhofer Institute for Industrial Mathematics (ITWM), Germany
Thermo-fluid-dynamic characterization of pulse jet cleaning of fabric filter bag units through computational fluid dynamic simulations
G. V. Messa, Politecnico di Milano; C. Maggi*, L. Montanelli, Clean Air Europe S.r.l., Italy
Day: 02 July 2026 Time: 13:00 - 14:15 h Room 3 Session Chair: Prof. Ioannis Nicolaou add to selection
Including pore channel tortuosity in ergun´s equation using spheres packing of different sizes
R. Pereira Dias*, Instituto Politécnico de Bragança, Portugal
Experimental benchmark tests for the validation of cfd-dem simulation of cake filtration
N. Benz*, S. Antonyuk, RPTU University Kaiserslautern-Landau, Germany
The impact of mineralogical composition on tailings dewatering by pressure filtration: Emphasis on clay type and case study presentation
L. Bonanni*, A. Grosso, F. Kaswalder, Diemme Filtration Srl; M. Carpenito, University of Ferrara, Italy
Day: 02 July 2026 Time: 13:00 - 14:15 h Room 4 Session Chair: Dr. Qian Zhang add to selection
Mapping the performance of charged nanocellulose-enabled ultrafiltration membranes
T. Levä*, H. Ghimire, M. Mäkelä, T. Tammelin, A. Khakalo, VTT Technical Research Centre of Finland; J. Nieminen, LUT School of Engineering Sciences, Finland; C. Pflieger, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Germany
Preventing biofilm and avoiding biofilm removal and maintenance in ultrafiltration in water treatment
J. Ronquillo*, Lam-X, Czech Republic
Fabrication of biobased electrospun and electrosprayed polymer membranes for water ultrafiltration
D. Martuzevičius*, G. Masionė, D. Čiužas, M. Tichonovas, T. Prasauskas, I. Urniežaitė, Kaunas University of Technology, Lithuania
Day: 02 July 2026 Time: 14:45 - 16:00 h Room 1 Session Chair: Dr. Harald Anlauf add to selection
Plasma nanocoating strategies to replace halogens in advanced filtration media
F. Legein*, Plasmalex SAS, France
Reduction and functionalization of composite graphene oxide/PVA/PEG freestanding paper via atmospheric pressure plasma for use in filtration membranes
F. Zelenák*, S. Sihelník, M. Stupavská, D. Kováčik, R. Krumpolec, Masaryk University, Czech Republic
Impact of a charged plasma polymer deposit on heavy metal rejection and clogging of a polyamide nanofiltration membrane
D. Taleb*, S. Déon, P. Fievet, Université Marie et Louis Pasteur; A. Airoudj, V. Roucoules, F. Bally-Le Gall, Université de Haute-Alsace, France
Day: 02 July 2026 Time: 14:45 - 16:00 h Room 2 Session Chair: Dr. Qian Zhang add to selection
3D simulation of aerosol deposition at a composite nonwoven of electrostatically charged wool and polypropylene fibers
V. Puderbach, K. Schmidt*, IT for Engineering (it4e) GmbH, Germany; V. Chan, Lanaco, New Zealand
A highly efficient flow-based surrogate for modeling particle deposition in filter structures
N. Jüngling*, J. Niessner, Heilbronn University of Applied Sciences, Germany
Effect of fine particle fraction on overall particle dynamics after their initial deposition on fibrous filter structures: Towards enhancing the computational efficiency of a comprehensive CFD-DEM modeling approach
J. Wieremiejczuk, J. Mačak*, C. Mehring, University of Stuttgart; C. Schulz, F. Hahn, MANN+HUMMEL GmbH, Germany
Day: 02 July 2026 Time: 14:45 - 16:00 h Room 3 Session Chair: Dr. Marco Gleiss add to selection
Direct mechanical recycling: Influence of cross-flow filtration on the characteristics of lithium-ion battery recyclate
P. Wiechers*, M. Gleiß, H. Nirschl, Karlsruhe Institute of Technology, Germany
Separation of ultrafine particles from tailings thickener overflow
E. Strand*, R. Salmimies, Sofi Filtration, Finland
Improved mineral tailings dewatering by pelleting flocculation
Y. Luo*, A. Stickland, The University of Melbourne, Australia
Nothing found.
0 / 25 selected